
Polyamide Resin
General Performance
- Good flexibility & toughness
- Long working life before gelation
- Good water & Corrosion resistance
- Low toxicity
- Wide range of compatibility with epoxies
- Low shrinkage on cure and exceptional dimensional stability
- Excellent resistance to mechanical impact or shock
- High flexural, compressive and tensile strength
- Exceptional resistance to thermal shock
- Good electrical resistance
- Excellent adhesion and bonding to a wide variety of materials
- Good machineability
- Possibility for a wide range of properties – from hard and strong, to soft and resilient on the other.
Polyamides
Products | Amine Value (mg KOH/g) |
Viscosity (25°C, cPs) 1) |
Color (Gardner) |
Pot life (mins) 2) |
AHEW | Type | Properties / Applications |
---|---|---|---|---|---|---|---|
Jointmide 3011 |
220 ± 20 |
3,500 ~ 7,000 @40ºC |
<8 |
20 ~ 30 |
180 |
Polyamide |
Good flexibility, high peels strength. General purpose adhesives, solvent based maintenance coatings, primers & sealers |
Jointmide 3012-1 |
280 ± 20 |
7,500 ~ 14,000 @40ºC |
<8 |
60 |
180 |
Polyamide |
Non-Cresol type. Good peel strength, good impact resistance. General purpose adhesives, solvent based maintenance coatings, primers & sealers |
Jointmide 3015 |
200 ± 20 |
5,000 ~ 11,000 |
<12 |
18 |
380 |
Polyamide |
High flexibility, good peel strength. General purpose adhesives where high peel strength is required, coatings required crack resistance |
Jointmide 302E |
170 ± 20 |
6,500 ~ 12,000 |
<12 |
39 |
380 |
Polyamide |
High elongations, high peel strength, impact resistance. Coal-tar epoxy, flexible coatings. |
Jointmide 306 |
270 ± 20 |
12,000 ~ 24,000 |
<8 |
35 ~ 45 |
150 |
Polyamide |
Good peel strength, good flexible adhesive, fast cure.Accelerated type of standard adhesives. |
Jointmide 314 |
310 ± 20 |
6,000 ~ 12,000 |
<7 |
2 ~ 3hrs *3 |
130 |
Polyamide |
High strength adhesives, 2 / 1 mixing, 100% solid, excellent adhesion to concrete, masonry, metal, wood and most structural materials. Multi-purpose adhesives, struactural adhesives. |
Jointmide 316 |
210 ± 20 |
40,000 ~ 70,000 @40ºC |
<8 |
360 |
180 |
Polyamide |
Good adhesion, toughness and excellent water and corrosion resistance. Anti-corrosion protection, solvent borne maintenance coatings, concrete coatings, adhesives |
Jointmide 3162 |
185 ± 20 |
40,000 ~ 80,000 @40ºC |
<15 |
6hrs |
180 |
Polyamide |
Economical cost. Anti-corrosion protection, solvent borne maintenance coatings, & adhesives |
Jointmide 316M |
210 ± 20 |
40,000 ~ 70,000 @40ºC |
<8 |
360 |
180 |
Polyamide |
Multi-purpose 2 component adhesives, inorganic surface adhesives |
Jointmide 317 |
300 ± 20 |
7,000 ~ 12,000 @40ºC |
<8 |
90 ~ 100 |
125 |
Polyamide |
Corrosion resistance,excellent adhesion, good water resistant, resiliency and high toughness. Adhesives, putties, sealants, marine & maintenance coatings, floor surfacing, casting & potting |
Jointmide 3172 |
280 ± 20 |
8,500 ~ 17,000 @40ºC |
<12 |
85 ~ 95 |
125 |
Polyamide |
Economical cost. Adhesives, putties, sealants, marine & maintenance coatings, & casting |
Jointmide 317A |
210 ± 20 |
6,000 ~ 10,000 @40ºC |
<8 |
7 |
160 |
Polyamide |
Seal cracks, rapid curing smooth-paste adhesive, |
Jointmide 317-2 |
230 ± 20 |
6,000 ~ 9500 @40ºC |
<7 |
20 ~ 30 |
150 |
Polyamide |
Vertical, horizontal & overhead crack sealing, pressure injection grouting, 1hr cure type |
Jointmide 317S |
320 ± 20 |
7,000 ~ 11,000 @40ºC |
<8 |
80 ~ 90 |
125 |
Polyamide |
Used in maintenance coatings, primers, enamel paint & multi-purpose adhesives |
Jointmide 317SM |
300 ± 20 |
7,000 ~ 11,000 @40ºC |
<7 |
75 |
125 |
Polyamide |
Used with liquid and solid epoxy blend for high performance coatings, industrial maintenance & marine applications, & adhesives |
Jointmide 317ST |
260 ± 20 |
8,000 ~ 13,000 @40ºC |
<8 |
56 |
120 |
Polyamide |
Used in maintenance coatings, primers, enamel paint & wood adhesives |
Jointmide 3178 |
230 ± 20 |
8,000 ~ 13,000 @40ºC |
<8 |
50 ~ 60 |
180 |
Polyamide |
Good flexible, less amine blush. Solvent based maintenance coatings, flexible adhesives, casting, & sealer |
Jointmide 3178-4 |
240 ± 20 |
6,000 ~ 12,000 @40ºC |
<8 |
25 ~ 35 |
140 |
Polyamide |
Faster cure type of Jointmide 3178 |
Jointmide 320 |
400 ± 30 |
1,500 ~ 3,000 |
<7 |
60 ~ 70 |
80 |
Polyamide |
Medium viscosity, excellent durability, less odor & toxicity. Sealants, resin mortar, grout bonding, putties & solvent free mastics, middle coat for epoxy floor |
Products | Amine Value (mg KOH/g) |
Viscosity (25°C, cPs) 1) |
Color (Gardner) |
Pot life (mins) 2) |
AHEW | Type | Properties / Applications |
---|---|---|---|---|---|---|---|
Jointmide 323 |
360 ± 20 |
2,500 ~ 4,500 |
<8 |
100 |
90 |
Polyamide |
Medium viscosity, adhesive, high solid, resin mortar, civil engineering |
Jointmide 325 |
340 ± 20 |
10,000 ~ 20,000 |
<7 |
136 |
100 |
Polyamide |
Good flexible adhesive, high solid coatings, excellent toughness. Mastics, mortars, epoxy putties & adhesioves. |
Jointmide 3252 |
310 ± 20 |
10,000 ~ 20,000 |
<15 |
100 ~ 110 @200g |
100 |
Polyamide |
Economical cost version of Jointmide 325 |
Jointmide 3375 |
350 ± 20 |
1,700 ~ 3,500 |
<10 |
199 *3 |
95 |
Polyamide |
Encapsulation, potting, adhesives & industrial maintenance coatings. |
Jointmide 326 |
310 ± 20 |
9,000 ~ 16,000 |
<8 |
25 ~ 35 |
105 |
Polyamide |
Wet surface tolerance coating, rapid development structural adhesives, damp surface primer |
Jointmide 329 |
570 ± 20 |
1,400 ~ 2,200 |
<10 |
20 |
80 |
Polyamide |
High compressive strength, fast cure. Epoxy concrete topping, adhesives, industrial coatings, high solid coatings |
Jointmide 329-1 |
580 ± 20 |
900 ~ 2,000 |
<10 |
40 |
80 |
Polyamide |
High compressive strength, fast cure. Epoxy concrete topping, adhesives, industrial coatings, high solid coatings |
Jointmide 329AD |
259 |
13,500 |
8< |
43 |
158 |
Polyamide |
Excellent toughness. Adhesive for aluminium, adhesives for civil and construction |
Jointmide 349-4 |
260 ± 20 |
500 ~ 1,000 |
<7 |
45 |
100 |
Polyamide |
Non-lustre coating, solvent free coating, encapsulation and casting applications. |
Jointmide 376 |
320 ± 20 |
3,500 ~ 5,000 |
<8 |
85 ~ 115 |
130 |
Polyamide |
Good bond strength. Automotive oil filter adhesives, construction adhesives |
Jointmide 925 |
320 ± 20 |
8,000 ~ 15,000 |
<8 |
55 ~ 65 |
90 |
Polyamide |
Resilient, toughness, good chemical resistance, wet surface tolerance adhesion. Concrete repair material, high solid coatings, bonding agents |
Jointmide 313 |
240 ± 20 |
3,000 ~ 5,000 |
<8 |
85 *3 |
150 |
Polyamide |
Good blush resistant, good flexibility, good chemical resistant. Maintenance mastic coatings, high solids. Metal & plastic adhesives. |
Jointmide 6130 |
200 ± 20 |
3,500 ~ 7,000 |
<5 |
170 *3 |
220 |
Polyamide |
High flexibility, good adhesion on ABS, excellent thermal shock resistance. Adhesives for plastics, civil engineering require flexibility & crack resistance. |
Products | Amine Value (mg KOH/g) |
Viscosity (25°C, cPs) 1) |
Color (Gardner) |
Pot life (mins) 2) |
AHEW | Type | Solid Content % |
Properties / Applications |
---|---|---|---|---|---|---|---|---|
Jointmide 150 |
50 ± 10 |
800 ~ 1,600 |
<8 |
500 |
64 ~ 100 |
Polyamide in Toluene/Isobutanol |
50 ± 2 |
Coal tar epoxy coatings, epoxy primer for metal, concrete or plastics |
Jointmide 160 |
60 ± 10 |
2,000 ~ 5,000 |
<12 |
400 |
50 ~ 80 |
Polyamide in Toluene |
60 ± 2 |
Fast dry, marine & heavy-duty industrial coating, |
Jointmide 160X |
60 ± 10 |
5,000 ~ 10,000 |
<10 |
400 |
50 ~ 80 |
Polyamide in Xylene |
60 ± 2 |
Marine & heavy-duty industrial coating, |
Jointmide 160X-D |
55 ± 10 |
1,000 ~ 2,500 |
<8 |
850 |
107 ~ 168 |
Polyamide in Xylene |
60 ± 2 |
Marine & heavy-duty industrial coating, |
Jointmide 165 |
65 ± 10 |
5,000 ~ 10,000 |
<8 |
370 |
45 ~ 74 |
Polyamide in Toluene/Isobutanol |
65 ± 2 |
Excellent adhesion with flexibility. Maintenance coatings, primer & enamel paint |
Jointmide 316X-60 |
130 ± 20 |
300 ~ 700 |
<8 |
300 |
38 ~ 60 |
Polyamides in Xylene |
60 ± 2 |
General use for corrosion resistance paint |
Jointmide 316X-70 |
150 ± 20 |
1,000 ~ 3,000 |
<8 |
260 |
33 ~ 51 |
Polyamides in Xylene |
70 ± 2 |
Excellent water & corrosion resistance, adhesion & substrate wetting. General use for corrosion resistance paint |
Jointmide 316X-80 |
160 ± 20 |
4,000 ~ 9,000 |
<8 |
230 |
30 ~ 46 |
Polyamides in Xylene |
80 ± 2 |
General use for corrosion resistance paint |
Jointmide 3162X-60 |
120 ± 20 |
250 ~ 600 |
<12 |
280 |
45 ~ 65 |
Polyamides in Xylene |
60 ± 2 |
Economical cost. General use for corrosion resistance paint |
Jointmide 338 |
200 ± 20 |
150 ~ 300 |
<8 |
150 ~ 170 |
21 ~ 33 |
Polyamide in solvesso |
64 ± 2 |
Excellent adhesion on oily surface. For poor oil cleaning surface concrete primer |
Jointmide 375 |
235 ± 20 |
200 ~ 500 |
<8 |
125 |
17 ~ 26 |
Amidoamine in Xylene |
82 ± 2 |
Low VOC, Adhesion to concrete and rusty surface. Humidity & corrosion resistance. Penetrating primer |
Jointmide 953S |
69 |
2,350 |
6 |
630 |
80 ~ 125 |
Polyamide in Xylene/n-butanol |
60 ± 2 |
Fast dry, good flexibility, good adhesion. Coal tar coatings, corrosion protective coatings |
Jointmide 970 |
140 ± 20 |
1,500 ~ 2,500 |
<6 |
240 |
30 ~ 48 |
Polyamide Adduct in Toluene/Isobutanol |
65 ± 3 |
Cure at low temperature & wet condition, good hardness & stiffness, good chemical resistance. Ballast tank coatings. |
Jointmide 970-1 |
140 ± 20 |
1,500 ~ 2,500 |
<6 |
240 |
30 ~ 48 |
Polyamide Adduct in Toluene/Isobutanol |
70 ± 2 |
Steel primers, high solids marine & maintenance coatings |
Products | Amine Value (mg KOH/g) |
Viscosity (25°C, cPs) 1) |
Color (Gardner) |
Pot life (mins) 2) |
AHEW | Type | Solid Content % |
Properties / Applications |
---|---|---|---|---|---|---|---|---|
Jointmide 981 |
180 ± 20 |
200 ~ 500 |
<10 |
170 |
21 ~ 34 |
Polyamide Adduct in Toluene/Isobutanol |
60 ± 2 |
Excellent water resistance & chemical resistance. Maintenance coatings, primers & enamel paint formulation |
Jointmide 981-75 |
220 ± 20 |
1,400 ~ 2,800 |
< 8 |
150 |
20 ~ 31 |
Polyamide Adduct in Toluene/Isobutanol |
75 ± 2 |
Excellent solvent resistance and chemical resistance. Maintenance coatings, primers & enamel paint formulation |
Jointmide 983 |
150 ± 20 |
1,200 ~ 3,800 |
<8 |
226 |
28 ~ 45 |
Polyamide in Xylene/n-butanol |
60 ± 2 |
Good impact resistance, good gloss. Industrial maintenance, anti-corrosion paints & epoxy enamel |
Jointmide 985 |
130 ± 20 |
800 ~ 1,600 |
<12 |
315 |
40 ~ 63 |
Polyamide Adduct in Toluene/ IPA |
60 ± 2 |
Fast dry, good adhesion on damp surface.. Coal tar coating, container paints, maintenance coatings |
Jointmide 987 |
230 ± 20 |
4,000 ~ 8,000 |
<8 |
180 |
23 ~ 36 |
Polyamide Adduct in Toluene/Isobutanol |
75 ± 2 |
Good solvent & chemical resistance, fast drying time, adhesion to poorly cleaned substrate. Coal tar epoxy, high solid coatings, epoxy primers |
Jointmide 987-75 |
240 ± 20 |
3,000 ~ 6,000 |
<8 |
165 |
21 ~ 33 |
Polyamide Adduct in n-butanol |
75 ± 2 |
Fast drying time, adhesion to poorly cleaned substrate. Surface tolerance coatings, Coal tar epoxy. |
Jointmide 928X |
233 |
2,990 |
6 |
186 |
24 ~ 37 |
Polyamide Adduct in Xylene |
75 ± 2 |
Good solvent & chemical resistance, fast drying time, adhesion to poorly cleaned substrate. Coal tar epoxy, high solid coatings, epoxy primers |
Jointmide 907D-60 |
106 |
3,175 |
4 |
377 |
48 ~ 75 |
Polyamide Adduct in Xylene/n-butanol |
60 ± 2 |
Fast dry, thixotropic property, zinc rich coatings |
Jointmide 994 |
110 ± 20 |
1,200 ~ 3,800 |
<8 |
370 |
47 ~ 74 |
Polyamide in Xylene/n-butanol |
62 ± 2 |
Fast dry, no induction time required, zinc rich primer. |
Jointmide X-982 |
150 ± 20 |
400 ~ 1,000 |
<10 |
235 |
30 ~ 47 |
Polyamide Adduct in Toluene/Isobutanol |
50 ± 2 |
Excellent water resistance & chemical resistance. Damp surface concrete primer, corrosion protective coatings |
2 Pot life in 100g mass at 25°C, minutes
3 Gel Time in 150g mass at 25°C, minutes
4 With standard Bisphenol A solid epoxy, EEW 450 ~ 575, e.g. DOW’s DER 661 resin